Is Your Garage Door Spring Broken? What Does It Cost to Fix It?

When you use your garage door, it requires counterweight springs to keep the door from going up when you open it. The springs are under a lot of tension and if they snap or break, it can be dangerous to operate your garage door. You might also find that they don’t work as smoothly as they should. There are several things you can check before calling a repairman. In many cases, fixing a broken or malfunctioning spring isn’t expensive and doesn’t take much time. Read on to learn more about broken garage door springs and how much it costs to fix them so you can make an informed decision about whether or not to call a professional for this job.

Check the Wire and Hinges

First, take a close look at the garage door wire and hinges. The wire should be taut without being overly tight. It should be long enough to retract the door when you close it but not so long that it sags when the door is open. If there’s too much slack in the wire, the springs will be under too much tension and they could break or slip out of place. When the wire is too tight, the door won’t be able to open or close properly. The door might not be able to open at all if the wire is too tight. If the wire is loose and sags, it could get caught in the door’s track and interfere with the door closing properly. That can lead to the door getting stuck. To check the hinges, raise and lower the door to check for smooth operation.

What Does it Cost to Repair a Broken Spring?

The cost to repair a broken spring may vary depending on where you live, but garage door springs generally cost between $10 and $50. You should also factor in the cost of an hour of labor. If you don’t feel comfortable doing the repair yourself, the cost of hiring a professional may be anywhere from $45 to $105. If the spring is broken and requires replacement, you can expect to spend between $50 and $100. The average total cost to repair or replace a spring is between $55 and $155.

Why Are Your Garage Door Springs Broken?

A broken spring is often a sign of a more serious issue with your garage door. For example, if your garage door track is bent or broken, it can cause the springs to stretch and break. If your garage door is not balanced, if it’s not installed correctly, or if it’s misaligned, it can cause the springs to break. It’s also possible that your garage door opener is malfunctioning. Garage door openers are heavy and put a lot of stress on the springs, and over time they can stretch and break. If a spring breaks from too much stress, you may be able to replace it. However, if one breaks because the opener is malfunctioning, you’ll need to replace the entire unit. If more than one spring has broken, it’s time to call a professional.

3 Reasons You Need to Replace Your Garage Door Springs

If the springs are stretched, broken, or misaligned, you need to replace them. If they’re stretched, they may not retract the door all the way or they may not retract it at all when you close it. If they’re broken or misaligned, they can cause the door to get stuck or bind in the track. If they’re broken, you risk being injured by the broken springs if you try to close the door manually. If the springs are broken, misaligned, or too old, you’ll have to replace them. Replacing old or worn springs is the safest and most efficient way to restore your door’s functionality.

How Much Does it Cost to Replace Garage Door Springs?

The cost to replace your garage door springs will likely depend on replacement springs, but you can expect to pay between $45 and $225 for a new set. Parts for garage doors are inexpensive since the doors aren’t complicated, but labor can make up the bulk of the cost. If you have one or two springs that need replacing, you can do the work yourself. Otherwise, you can call a professional to replace all of the springs at the same time. Replacing all of the springs at the same time is less expensive than replacing one at a time.

Bottom Line

If your garage door springs break, you may be able to repair them. It’s best to repair your broken springs before replacing them. It’s not an especially difficult job and it can save you money. Replacing your garage door springs is usually a more serious job that requires removing the old springs, installing the new springs, and making any adjustments to the door that are necessary. It’s also a more expensive job that can cost up to $225 to complete.

Editor
Author: Editor

Related articles